MSI MS-6382 Especificaciones descargar pdf (Pagina 42)

AWARD

BIOS Setup

3-11

Boot Up NumLock Status

This item is to set the Num Lock status when the system is powered on.

Setting to On will turn on the Num Lock key when the system is powered on.

Setting to Off will allow end users to use the arrow keys on the numeric

keypad. Settings are On and Off. Default is On.

Gate A20 Option

This item is to set the Gate A20 status. A20 refers to the first 64KB of

extended memory. When the default value Fast is selected, the Gate A20 is

controlled by Port92 or chipset specific method resulting in faster system

performance. When Normal is selected, A20 is controlled by a keyboard

controller or chipset hardware.

Typematic Rate Setting

This item is used to enable or disable the typematic rate setting including

Typematic Rate & Typematic Delay.

Typematic Rate (Chars/Sec)

After Typematic Rate Setting is enabled, this item allows you to set the rate

(characters/second) at which the keys are accelerated. Setting options are 6,

8, 10, 12, 15, 20, 24 and 30.

Typematic Delay (Msec)

This item allows you to select the delay between when the key was first

pressed and when the acceleration begins. Setting options are 250, 500,

750 and 1000.

OS Select for DRAM > 64MB

This allows you to run the OS/2

operating system with DRAM larger than

64MB. When you choose the default value Non-OS2, you cannot run the

OS/2

operating system with DRAM larger than 64MB. But it is possible if

you choose OS2. Default value is Non-OS2.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 69 70

Sin comentarios

MSI MS-6382 Especificaciones Pagina 42