MSI MS-6382 Especificaciones descargar pdf (Pagina 41)

Chapter 3

3-10

CPU L2 Cache ECC Checking

This allows you to enable or disable the ECC (Error-Correcting Code) feature

to check the data when it passes through L2 cache memory. Settings are

Enabled and Disabled. Default value is Enabled.

Quick Power On Self Test

Setting the item to Enabled allows the system to shorten boot time since it

will skip some check items. Settings are Enabled and Disabled. Default

value is Enabled.

First/Second/Third Boot Device

The items allow you to set the sequence of boot devices where BIOS

attempts to load the disk operating system. The settings are:

HDD-0 The system will boot from the first HDD.

HDD-1 The system will boot from the second HDD.

HDD-2 The system will boot from the third HDD.

HDD-3 The system will boot from the fourth HDD.

Floppy The system will boot from floppy drive.

ZIP100 The system will boot from ATAPI ZIP drive.

LS-120 The systm will boot from LS-120 drive.

SCSI The system will boot from the SCSI.

LAN The system will boot from the Network drive.

CD-ROM The system will boot from the CD-ROM.

Disabled Disable this sequence.

Boot Other Device

Setting the option to Enabled allows the system to try to boot from other

device if the system fails to boot from the 1st/2nd/3rd boot device.

Swap Floppy Drive

Setting to Enabled will swap floppy drives A: and B:. Default is Disabled.

Boot Up Floppy Seek

Setting to Enabled will make BIOS seek floppy drive A: before booting the

system. Setting options are Disabled and Enabled. Default is Enabled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 69 70

Sin comentarios

MSI MS-6382 Especificaciones Pagina 41