MSI 865PE Neo3-F Manual de usuario descargar pdf (Pagina 24)

iPoint NVR v5.16 Server Manual

【DO Port】【DO Port Name】If an alarm input is in use and there is alarm associated with a

camera, the alarm will be sent to the client automatically, same with sensors. But the client will only

automatically connect to the cameras when an alarm is detected.

【Send Alarm to Client】Selects whether alarm are sent to a network client or not.

【Motion Detected In Camera】Selects camera from dropdown list.

【Play Alarm Sound】Selects a “.wav” sound file for a camera alarm. If there is an alarm, the

sound file will be played.

【Trigger DO Output】Selects which DO port responds with an alarm on a camera. All connected

devices will send an alarm message when there is Motion Detect.

Schedule Setup

Figure1-3-10

1. Check Alarm is (Red): DVR System responds with Motion Detected and sends an alarm

message only in the time selected. (Every day 00:00 to13:00)

2. Not

Check is (Gray): DVR System doesn’t respond with Motion Detected in the time not selected.

Note:

1. The time settings must correspond with Motion Detection time under CAMERA SETUP,

otherwise it will work improperly.

2. Check Alarm Setting does not affect Motion Detection Record. It is only an alarm setting.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Sin comentarios

MSI 865PE Neo3-F Manual de usuario Pagina 24