MSI 865PE Neo3-F Manual de usuario descargar pdf (Pagina 19)

iPoint NVR v5.16 Server Manual

picture as disabled and the alarm will disappear. When you want to use them later, set as enabled

again.

2. The unit of the swap file should be MB. 2-50 is the range.

3. Set the position and contrast of the date shown on the screen. Sometimes the date cannot be

clearly seen for its color is similar with the background. You can change its position or color when

this happen.

4. Image size is the format used when recording. And Remote image size is the format used when

these images are transmitted to client sides.

5. Remote Frame Rate, Remote image size and Remote Quality are the parameters of the client

side. When the server’s resolution is set as “D1 Auto F”, these three items are no effected. The

client’s parameters will be same as the server. When the server’s resolution is set as others

(except “D1 Auto F”), if Remote image size is set as “with record”, Remote Frame Fate(fps) and

Remote Quality are not effected, the client’s parameters will be same as server’s.

5. Variable Digital Rate Table

Image quality

recording environment occupied disk space (/com/hour)

low action indoor about 45mb

Poorest

high action road about 95mb

low action indoor about 70mb

medium

high action road about 180mb

low action indoor about 160mb

best

high action road about 320mb

*Note: Invariable digital rate can not improve image quality but it is helpful for counting disk space.

Variable digital rate recording is recommended.

Cameras can be grouped to work according to time lists.

Note: If you setup groups with conflicting camera, then only the last setup is going to work.

【Selected Group】Select group number.

【Selected Cameras】 Select the camera that have the same work mode with group.

【Pre-Event Record】 Select the start time of record when there is an alarm. When DVR system is

in Motion Detect mode or Sensor Detect mode, it can record video before the alarm is trigged.

【Post Record Time】Select the end time of record when there is an alarm. When the system is in

Motion Detect mode or Sensor Detect mode, it can record video after the alarm end.

【Record Audio】Selects Yes or not.

Schedule Setup (Example for the following figure)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Sin comentarios

MSI 865PE Neo3-F Manual de usuario Pagina 19