MSI MS-8801 Especificaciones descargar pdf (Pagina 50)

3-18

MS-6703 M-ATX Mainboard

serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,

Disabled, Auto.

Onboard Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that

provides Standard, ECP, and EPP features. It has the following options:

Disabled

3BC/IRQ7 Line Printer port 0

278/IRQ5 Line Printer port 2

378/IRQ7 Line Printer port 1

Parallel Port Mode

SPP : Standard Parallel Port

EPP : Enhanced Parallel Port

ECP : Extended Capability Port

ECP + EPP: Extended Capability Port + Enhanced Parallel Port

To operate the onboard parallel port as Standard Parallel Port only, choose

“SPP.” To operate the onboard parallel port in the EPP mode simultane-

ously, choose “EPP.” By choosing “ECP”, the onboard parallel port will

operate in ECP mode only. Choosing “ECP + EPP” will allow the onboard

parallel port to support both the ECP and EPP modes simultaneously.

EPP Mode Select

The onboard parallel port is EPP Spec. compliant, so after the user chooses

the onboard parallel port with the EPP function, the following message

will be displayed on the screen: “EPP Mode Select.” At this time either

EPP 1.7 spec or EPP 1.9 spec can be chosen.

ECP Mode Use DMA

The ECP mode has to use the DMA channel, so choose the onboard

parallel port with the ECP feature. After selecting it, the following mes-

sage will appear: “ECP Mode Use DMA.” At this time, the user can

choose between DMA channel 3 or 1.

Init Display First

This item specifies which VGA card is your primary graphics adapter. Settings:

PCI Slot and AGP.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 60 61

Sin comentarios

MSI MS-8801 Especificaciones Pagina 50