MSI MS-8801 Especificaciones descargar pdf (Pagina 41)

3-9

BIOS Setup

Floppy The system will boot from floppy drive.

LS120 The system will boot from LS-120 drive.

HDD-0 The system will boot from the first HDD.

SCSI The system will boot from the SCSI.

CDROM The system will boot from the CD-ROM.

HDD-1 The system will boot from the second HDD.

HDD-2 The system will boot from the third HDD.

HDD-3 The system will boot from the fourth HDD.

ZIP100 The system will boot from ATAPI ZIP drive.

USB-FDD The system will boot from USB-interfaced floppy drive.

USB-ZIP The system will boot from any USB-interfaced ATAPI

ZIP drive

USB-CDROM The system will boot from the USB-interfaced CD-ROM.

USB-HDD The system will boot from the USB-interfaced HDD.

LAN The system will boot from the Network drive.

Disabled Disable this sequence.

Boot Other Device

Setting the option to Enabled allows the system to try to boot from other

device if the system fails to boot from the 1st/2nd/3rd boot device.

Swap Floppy

Setting to Enabled will swap floppy drives A: and B:.

Seek Floppy

Setting to Enabled will make BIOS seek floppy drive A: before booting the

system. Settings: Disabled, Enabled.

Boot Up NumLock Status

This setting is to set the Num Lock status when the system is powered on.

Setting to On will turn on the Num Lock key when the system is powered on.

Setting to Off will allow users to use the arrow keys on the numeric keypad.

Setting options: On, Off.

MSI Reminds You...

Available settings for “1st/2nd/3rd Boot Device” vary depend-

ing on the bootable devices you have installed. For example, if

you did not install a floppy drive, the setting “Floppy” does not

show up.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 60 61

Sin comentarios

MSI MS-8801 Especificaciones Pagina 41