Msi X2-109 v1 Manual de usuario descargar pdf (Pagina 72)

4-20 MegaCLI Command Tool

4.9.9 Prepare Unconfigured Physical Disk Drives for Removal

Use the command in Tabl e 4. 35 to prepare an unconfigured physical disk

drive(s) for removal from the selected adapter(s).

4.9.10 Display Number of Physical Disk Drives

Use the command in Table 4 . 3 6 to display the total number of physical

disk drives attached to an adapter. Drives can be attached directly or

through enclosures.

4.9.11 Display List of Physical Drives

Use the command in Table 4 . 3 7 to display a list of the physical drives

connected to the selected adapter(s).

Description Replaces the configured physical disk drives, then starts an automatic rebuild. The

specified arrayIndex and row must be a missing drive.

Table 4.34 Replace Configured Disk Drives and Start Automatic Rebuild (Cont.)

Table 4.35 Prepare Unconfigured Physical Disk Drives for Removal

Syntax CmdTool –PDPrpRmv [-Undo] –PhysDrv[E0:Sn....] -aN|-a0,1,2|-aALL

Description Prepares unconfigured physical drive(s) for removal. The drive is spun down, and

the drive state is set to unaffiliated, which marks it as offline even though it is not a

part of configuration.

The -Undo option undoes this operation, and the firmware marks this physical disk

as Unconfigured-Good.

Table 4.36 Display Number of Physical Disk Drives

Syntax CmdTool –PDGetNum –aN|-a0,1,2|-aALL

Description Displays the total number of physical disk drives attached to an adapter. The return

value is the number of physical disk drives.

Table 4.37 Display List of Physical Drives

Syntax CmdTool –PDList –aN|-a0,1..|-aAll

Description Displays information about all physical disk drives connected to the selected

adapter(s). This includes information such as the drive type, size, serial number, and

firmware version. For SAS devices, this includes additional information such as the

SAS address.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 131 132

Sin comentarios

Msi X2-109 v1 Manual de usuario Pagina 72