Msi X2-109 v1 Manual de usuario descargar pdf (Pagina 114)

8-6 Monitoring System Events and Storage Devices

Figure 8.3 Virtual Disk Properties

The RAID level, stripe size, and access policy of the virtual disk are set

when it is configured.

Note:

You can change the read policy, write policy, and other

virtual disk properties by selecting Operations->Set Virtual

Disk Properties.

The next release of Embedded MegaRAID Software will enable you to

identify which physical drives are used in a virtual disk by blinking the

drive LEDs. (This will work only for drives that are in a disk enclosure.)

The procedure for doing this is as follows:

1. Click the virtual disk icon in the left panel.

2. Click the Operations tab in the right panel.

3. Select Locate Virtual Disk, and click Go.

The LEDs on the physical disk drives in the virtual disk start blinking

(except for hotspare drives).

4. To stop the LEDs from blinking, select Stop Locating Virtual Disk,

and click Go.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 131 132

Sin comentarios

Msi X2-109 v1 Manual de usuario Pagina 114