MSI MS-9105 Manual de instrucciones descargar pdf (Pagina 62)

Chapter 3

3-20

POWER ON Function

This controls which part on the PS/2 mouse or keyboard can power on

the system. Settings: Password, Hot KEY, Mouse Left, Mouse Right,

Any KEY, BUTTON ONLY and Keyboard 98.

KB Power ON Password

If POWER ON Function is set to Password, then you can set a pass-

word in the field for PS/2 keyboard to power on the system.

Hot Key Power ON

If POWER ON Function is set to Hot KEY, then you can assign a hot

key combination in the field for the PS/2 keyboard to power on the

system. Settings: Ctrl-F1 through Ctrl-F12.

Onboard FDC Controller

The field enables or disables the onboard Floppy controller. Select

Enabled when you have a floppy disk drive installed and want to use it.

Onboard Serial Port 1/2

The items specify the base I/O port address and IRQ for the onboard

Serial Port 1 (COM A)/Serial Port 2 (COM B). Selecting Auto allows

BIOS to automatically determine the correct base I/O port address.

Settings: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and

POWER ON Function BUTTON ONLY

KB Power ON Password Enter

Hot Key Power ON Ctrl-F1

Onboard FDC Controller Enabled

Onboard Serial Port 1 3F8/IRQ4

Onboard Serial Port 2 2F8/IRQ3

UART Mode Select Normal

RxD, TxD Active Hi, Lo

IR Transmission Delay Enabled

UR2 Duplex Mode Half

Use IR Pins IR-Rx2Tx2

Onboard Parallel Port 378/IRQ7

Parallel Port Mode SPP

EPP Mode Select EPP1.7

ECP Mode Use DMA 3

SuperIO Device

Item Help

Menu Level 88

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 81 82

Sin comentarios

MSI MS-9105 Manual de instrucciones Pagina 62