MSI MS-6507 Manual de instrucciones descargar pdf (Pagina 60)

Chapter 3

3-20

CPU THRM-Throttling

The item allows you to specify the CPU speed (at percentage) to which it will

slow down when the CPU reaches the predetermined overheat temperature.

Settings range from 12.5% to 87.5% at 12.5% increment.

Resume by RTC Alarm

The field is used to enable or disable the feature of booting up the system on

a scheduled time/date.

Date (of Month) Alarm

The field specifies the date for Resume by RTC Alarm. Settings: 0~31.

Time (hh:mm:ss) Alarm

The field specifies the time for Resume by RTC Alarm. Format is <hour>

<minute><second>.

POWER ON Function

This setting controls which part on the PS/2 mouse or keyboard can power on

the system. Settings: Password, Hot KEY, Mouse Left, Mouse Right, BUTTON

ONLY and Keyboard 98. Please note that this function will only work under S3

mode.

KB Power ON Password

If POWER ON Function is set to Password, then you can set a password in the

field for the PS/2 keyboard to power on the system. Please note that this

function will only work under S3 mode.

Hot Key Power ON

If POWER ON Function is set to Hot KEY, you can assign a hot key combina-

tion in the field for the PS/2 keyboard to power on the system. Settings: Ctrl-

F1 through Ctrl-F12. Please note that this function will only work under S3

mode.

After AC Power Lost

This setting specifies whether your system will reboot after a power failure or

interrupts occurs. Available settings are:

Power Off Leaves the computer in the power off state.

Power On Reboots the computer.

Last State Restores the system to the status before power failure or

interrupt occurs.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 71 72

Sin comentarios

MSI MS-6507 Manual de instrucciones Pagina 60