MSI MS-6382 Especificaciones descargar pdf (Pagina 52)

AWARD

BIOS Setup

3-21

If the ISA add-on card has Onboard parallel port to be set as

!!!Disabled X

!!X LPT3 5

! X ! LPT2 5

X !! LPT1 7

! X X LPT2 5

X ! X LPT1 7

XX! LPT1 7

X X X LPT1 7

LPT1

I/O:378H

LPT2

I/O:278H

LPT3

I/O:3BCH

PORT

ASSIGNED

IRQ

ASSIGNED

Use IR Pins

Consult your IR peripheral documentation to select the correcting of the TxD

and RxD signals. Settings are IR-Rx2Tx2 and RxD2, TxD2.

Onboard Parallel Port

This specifies the base I/O port address of the onboard Parallel Port.

Settings are 378/IRQ7, 278/IRQ5, 3BC/IRQ7 and Disabled. Default is 378/

IRQ7. If you have an ISA add-on card, the suggested configuration is as

below:

Note: If the onboard parallel port interrupt and ISA add-on card interrupt

are in conflict, the parallel port will not work properly. Please disable

one of the devices.

Parallel Port Mode

This item selects the operating mode for the parallel port to support: SPP,

EPP, ECP or ECP+EPP. Default is SPP.

EPP Mode Select

The item selects the EPP version used by the parallel port if the port is set to

EPP or ECP+EPP mode. Settings are EPP1.7 and EPP1.9.

ECP Mode Use DMA

This item automatically specifies an DMA channel 1 or 3 for the Parallel Port

when it is set to ECP or ECP+EPPmode.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 69 70

Sin comentarios

MSI MS-6382 Especificaciones Pagina 52