
2-24
MS-6570 ATX Mainboard
D-Bracket™ 2 Connector: JDLED1
The mainboard comes with a JDLED1 connector for you to connect to
D-Bracket™ 2. D-Bracket™ 2 is a USB Bracket that supports both USB1.1 &
2.0 spec. It integrates four LEDs and allows users to identify system problem
through 16 various combinations of LED signals. For definitions of 16 signal
combinations, please refer to D-Bracket™ 2 (Optional) in Chapter 1.
Pin Signal
1 DBG1 (high for green color)
2 DBR1 (high for red color)
3 DBG2 (high for green color)
4 DBR2 (high for red color)
5 DBG3 (high for green color)
6 DBR3 (high for red color)
7 DBG4 (high for green color)
8 DBR4 (high for red color)
9 Key
10 NC
Pin Definition
JDLED1
1
9
2
10
D-Bracket™ 2 (optional)
LEDs
Connected to JDLED1
Connected to JUSB2
Comentarios a estos manuales