MSI 865PE Neo Manual de instrucciones descargar pdf (Pagina 74)

3-25

BIOS Setup

Onboard Serial Port A/B

These items specify the base I/O port addresses of the onboard Serial

Port 1 (COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS

to automatically determine the correct base I/O port address. Settings:

Auto, 3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.

Serial Port B Mode

This item sets the operation mode for Serial Port B. Settings: Normal,

1.6uS, 3/16 Baud and ASKIR (the last three operation modes are

setting options for IR function).

IR Duplex Mode

This setting controls the operating mode of IR transmission/

reception. Setting options: Full Duplex, Half Duplex. Under Full

Duplex mode, synchronous, bi-directional transmission/reception

is allowed. Under Half Duplex mode, only asynchronous, bi-

directional transmission/reception is allowed.

IR Pin Select

Set to IRRX/IRTX when using an internal IR module connected to

the IR connector. Set to SINB/SOUTB. when connecting an IR

adapter to COM B.

Onboard Parallel Port

This field specifies the base I/O port address of the onboard parallel port.

Selecting Auto allows AMIBIOS to automatically determine the correct

base I/O port address. Settings: Auto, 378, 278, 3BC and Disabled.

Parallel Port Mode

This item selects the operation mode for the onboard parallel port: ECP,

Normal, Bi-Dir or EPP.

EPP Version

The item selects the EPP version used by the parallel port if the port

is set to EPP mode. Settings: 1.7 and 1.9.

Parallel Port IRQ

When Onboard Parallel Port is set to Auto, the item shows Auto

indicating that BIOS determines the IRQ for the parallel port

automatically.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 147 148

Sin comentarios

MSI 865PE Neo Manual de instrucciones Pagina 74