Msi MS-96C8 Series Manual de usuario descargar pdf (Pagina 103)

B-13

LSI SAS RAID

3.4 Managing Hot Spares

You can create one global hot spare disk to protect the one or two IM/IME volumes

defined on a SAS controller. Usually, you create the global hot spare at the same time

you create the IM/IME volume. Follow these steps to add a global hot spare disk later

for the existing IM/IME volumes on the controller:

1. On the View Array screen, select Manage Array.

2. Select Manage Hot Spare on the Manage Array screen, shown in Figure 3.3.

3. Select a disk from the list by pressing the + key, . key, or space bar.

4. After you select the global hot spare disk, press C. An error message appears

if the selected disk is not at least as large as the smallest disk used in the IM/

IME volume(s). The global hot spare disk must have 512-byte blocks, it cannot

have removable media, and the disk type must be either SATA with extended

command set support or SAS with SMART support. If SATA disks are used for

the IM/IME volume(s), the hot spare disk must also be a SATA disk. If SAS disks

are used, the hot spare disk must also be a SAS disk. An error message

appears if the selected disk is not the same type as the disks used in the IM/IME

volumes.

5. Select Save changes then exit this menu to commit the changes. The

configuration utility will pause while the global hot spare is being added.

Follow these steps to delete a global hot spare:

1. Select Manage Hot Spare on the Manage Array screen.

2. Select Delete Hot Spare and then press C.

3. Select Save changes then exit this menu to commit the changes. The

configuration utility will pause while the global hot spare is being removed.

PDF created with pdfFactory Pro trial version www.pdffactory.com

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 112 113

Sin comentarios

Msi MS-96C8 Series Manual de usuario Pagina 103