Msi MS-91C2 Series Manual de usuario descargar pdf (Pagina 27)

2-15

Hardware Setup

Clear CMOS Jumper: JBAT1

There is a CMOS RAM onboard that has a power supply from an external battery to

keep the data of system configuration. With the CMOS RAM, the system can auto-

matically boot OS every time it is turned on. If you want to clear the system configuration,

set the jumper to clear data.

Jumper

Important

You can clear CMOS by shorting 2-3 pin while the system is off. Then return

to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will

damage the mainboard.

JBAT1

Clear Data

Keep Data

BMC Flash Jumper: J_BMC_WP1

This jumper is used to enable/disable the BMC flash. When you intend to update the

BMC code, uncap this jumper first. Under normal operation, we suggest that you

disable the BMC flash by capping this jumper to protect the BMC from virus infection.

J_BMC_WP1

Enable BMC FlashDisable BMC Flash

PDF created with pdfFactory Pro trial version www.pdffactory.com

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 81 82

Sin comentarios

Msi MS-91C2 Series Manual de usuario Pagina 27