Msi FUZZY 945GME1 Manual de usuario descargar pdf (Pagina 53)

3-19

BIOS Setup

Frequency/ Voltage Control

Auto Detect PCI Clk

This item is used to auto detect the PCI slots. When set to [Enabled], the system

will remove (turn off) clocks from empty PCI slots to minimize the electromag-

netic interference (EMI).

Spread Spectrum

When the motherboard’s clock generator pulses, the extreme values (spikes)

of the pulses creates EMI (Electromagnetic Interference). The Spread Spec-

trum function reduces the EMI generated by modulating the pulses so that the

spikes of the pulses are reduced to flatter curves.

Important

1. If you do not have any EMI problem, leave the setting at [Disabled]

for optimal system stability and performance. But if you are plagued

by EMI, select the value of Spread Spectrum for EMI reduction.

2. The greater the Spread Spectrum value is, the greater the EMI is

reduced, and the system will become less stable. For the most

suitable Spread Spectrum value, please consult your local EMI

regulation.

3. Remember to disable Spread Spectrum if you are overclocking

because even a slight jitter can introduce a temporary boost in

clock speed which may just cause your overclocked processor to

lock up.

PDF created with pdfFactory Pro trial version www.pdffactory.com

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 82 83

Sin comentarios

Msi FUZZY 945GME1 Manual de usuario Pagina 53