Msi 945GC Networks Manual de usuario descargar pdf (Pagina 19)

2-3

Hardware Setup

Memory

64x2=128 pin 56x2=112 pin

DDR2

240-pin, 1.8V

These DIMM slots are intended for system memory modules.

Installing Memory Modules

1. Locate the DIMM slots on the mainboard. Flip open the retaining clip at each side

of the DIMM slot.

2. Align the notch on the DIMM with the key on the slot. Insert the DIMM vertically into

the DIMM slot. Then push it in until the golden finger on the DIMM is deeply inserted

in the DIMM slot. The retaining clip at each side of the DIMM slot will automatically

close if the DIMM is properly seated.

3. Manually check if the DIMM has been locked in place by the retaining clips at the

sides.

4. Follow the same procedures to install more DIMMs if necessary.

Important

You can barely see the golden finger if the DIMM is properly inserted in the

DIMM slot.

Volt

Notch

PDF created with pdfFactory Pro trial version www.pdffactory.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Sin comentarios

Msi 945GC Networks Manual de usuario Pagina 19